Nonferrous Metal Wire

Nonferrous Metal Wire

1.Brass Wire

Hard brass: 0.15mm to 0.33mm
Tensile strength: 900N/mm2
Soft brass: 0.15mm to 0.33mm
Tensile strength: 450N/mm2
Zinc-plated: 0.15mm to 0.33mm
Tensile strength: 900N/mm2
Excellent conductivity and superior straightness
Without brass wire scrap and flawless surface
High dimensional precision for both diameter and roundness
Electrical discharge wiring for machines

Spool type	Diameters
Spool type	0.15	0.20	0.25	0.30
K 125	*	*	*	*
K 160	*	*	*	*
K 200	-	*	*	*
K 355	-	-	*	*
P 5	*	*	*	*
P 10	-	*	*	*
P 15	-	*	*	*

2.Nickel Wire

We mainly produce and offer various metal wire for industrial use, like nickel wire, stainless steel wire and other nonferrous metal wire, sizes normally from 0.03mm to 2.0mm. Please refer to lists below for detail information.

Nickel Wire: wire diameter ranges from 0.07mm--5.0mm.

Metal wire for Industrial Use
Wire Diameter (mm)	Difference of Metal Wire Diameter d (mm)
	Steel	Stainless steel or nonferrous metal
	Steel	I	II
1.000* 0.900 0.800* 0.701*	+/-0.03	+/-0.015	+0.03 -0.015
0.630* 0.560 0.500* 0.450	+/-0.02	+/-0.010	+0.025 -0.010
0.400* 0.355 0.315* 0.280	+/-0.015	+/-0.008	+0.025 -0.008
0.200* 0.224 0.200* 0.180	+/-0.010	+/-0.006	+0.020 -0.006
0.160* 0.140 0.125* 0.112	+/-0.008	+/-0.004	+0.015 -0.004
0.100* 0.090 0.080* 0.071	+/-0.006	+/-0.003	+0.007 -0.003
0.063* 0.056 0.050* 0.045	----	+/-0.002	+0.005 -0.002
0.040* 0.036 0.032* 0.030 0.028	-----	+/-0.0015	+0.0040 -0.0015
0.025* 0.022 0.020* 0.018	----	+/-0.0015	+0.0030 -0.0015
Note: Diameters marked with * should be given priority.

Address: East Industry Development Area, AnPing County, Hengshui,
HeBei ,P.R.China P.C. 053600
Tel:+86-318-7513895 7522638 Fax:+86-318-7523895
E-mail:Sales@jsl-wiremesh.com